Three robots, one wall
A boost, a hanging chain, and a final pull: three humanoids help one another reach the top of a 60° wall.
This browser could not play the video. Try the Download MP4 link below.
Shared tasks. Coordinated motion.
Two or more robots, one shared task. Carrying, building, climbing, and figuring out how to move together.
Recorded Rust/Bullet simulations with automatic controllers.
A boost, a hanging chain, and a final pull: three humanoids help one another reach the top of a 60° wall.
This browser could not play the video. Try the Download MP4 link below.
Two humanoids carry a couch through doors, around corners, and up stairs, coordinating their grip, orientation, and pace.
This browser could not play the video. Try the Download MP4 link below.
Carry a shared tray through a winding route without spilling its contents. Both robots must coordinate height, acceleration, and heading; a correct path alone is insufficient.
This browser could not play the video. Try the Download MP4 link below.
Move a long beam through a slalom where translating straight ahead cannot work. Each carrier must make room for the other end during rotations.
This browser could not play the video. Try the Download MP4 link below.
Carry a tall panel into a rack while gusts apply both lateral force and twisting torque. The team must change stance and hand loading without laying the panel down.
This browser could not play the video. Try the Download MP4 link below.
Carry a bar with a payload hanging beneath it through obstacles, then lower the payload into a cradle. The robots must damp swing caused by their own motion.
This browser could not play the video. Try the Download MP4 link below.
Deliver a crate whose internal mass slides during starts, stops, and turns. Each robot must respond to load redistribution instead of assuming equal weight sharing.
This browser could not play the video. Try the Download MP4 link below.
Roll and steer a heavy cylinder down a gentle incline into a parking cradle. One robot supplies forward motion while the other controls yaw and runaway speed, exchanging roles at a bend.
This browser could not play the video. Try the Download MP4 link below.
Transport a tall stack on a small wheeled platform while a teammate stabilizes it from changing sides. The stack must remain assembled in its original order.
This browser could not play the video. Try the Download MP4 link below.
Four humanoids carry loose cargo in a shared flexible hammock and deposit it into a bin. Corner heights and spacing determine whether the cargo stays centered.
This browser could not play the video. Try the Download MP4 link below.
Pull a sled through a narrow route using only two front ropes. Steering emerges from differential tension, and the robots must avoid pulling the sled into posts or overturning it.
This browser could not play the video. Try the Download MP4 link below.
Transfer a parcel across three isolated platforms without any robot leaving its own platform. Every handoff requires the receiver to establish support before the sender releases.
This browser could not play the video. Try the Download MP4 link below.
Insert both ends of a heavy beam into opposing sockets without binding either end. The robots must coordinate small translations and rotations rather than completing one insertion independently.
This browser could not play the video. Try the Download MP4 link below.
Raise a ceiling panel and secure its fasteners while maintaining support. One robot changes from carrier to installer as the other takes a larger share of the load.
This browser could not play the video. Try the Download MP4 link below.
Hold two heavy hinge components coaxial while inserting a long pin. Completion includes exercising the hinge to demonstrate that it is assembled without binding.
This browser could not play the video. Try the Download MP4 link below.
Install a long pipe between two couplings while a third robot supports its middle. The end robots align and lock the couplings without allowing the pipe to sag or twist out of position.
This browser could not play the video. Try the Download MP4 link below.
Construct an arch that needs temporary humanlike support during assembly but remains standing when all three robots let go.
This browser could not play the video. Try the Download MP4 link below.
Stack a thin freestanding wall while a partner moves a brace to support the growing structure. The finished layout must remain stable after the brace is removed.
This browser could not play the video. Try the Download MP4 link below.
Deploy a folded ramp whose sections must be independently supported until their hinge locks engage. Each robot controls a different section during the unstable intermediate configurations.
This browser could not play the video. Try the Download MP4 link below.
Place a plank over a gap, cross in an order that preserves control, and recover the plank onto the far side. Both robots and their shared equipment must finish together.
This browser could not play the video. Try the Download MP4 link below.
Cross a pivoting walkway by using body position as a counterweight. One robot advances while the other adjusts its position to keep the deck within a safe angle.
This browser could not play the video. Try the Download MP4 link below.
Raise one robot on a pulley platform, transfer control to the upper landing, and bring the second robot up. The first arrival must secure and operate the mechanism for its partner.
This browser could not play the video. Try the Download MP4 link below.
Cross alternating low-friction and high-friction patches while holding teammates. A robot on secure footing supports another during each hazardous step.
This browser could not play the video. Try the Download MP4 link below.
Cross a sequence of buoyant platforms whose pitch, roll, and immersion change under the team's weight. The robots must distribute load and assist each other's transfers.
This browser could not play the video. Try the Download MP4 link below.
Move between platforms that drift out of alignment. One robot restrains the next platform while the other establishes a secure foothold, then they exchange roles.
This browser could not play the video. Try the Download MP4 link below.
Propel and steer a small boat using one oar per robot, then stop and secure it at a dock. Unequal strokes turn the boat, and poor timing wastes thrust or destabilizes it.
This browser could not play the video. Try the Download MP4 link below.
Reach separate goal zones while connected by a short rope. Individually valid paths can be mutually incompatible because the tether may wrap around posts or pull a partner off course.
This browser could not play the video. Try the Download MP4 link below.
Move a bulky object through a self-closing door, then get both robots through. Door support must transfer from the first robot to the second without trapping the object or either humanoid.
This browser could not play the video. Try the Download MP4 link below.
Lift a large hinged floor hatch using separated handles, then engage its mechanical support. Uneven lifting twists the hatch and can jam its guides.
This browser could not play the video. Try the Download MP4 link below.
Raise a gate, transfer its control from one side to the other, and close it after both robots pass. The counterweight reduces effort but does not hold the gate by itself.
This browser could not play the video. Try the Download MP4 link below.
Hold three separated releases while moving a large panel far enough that its latches cannot re-engage. Each robot controls one latch and contributes to the initial opening motion.
This browser could not play the video. Try the Download MP4 link below.
Cross a hanging bridge while two teammates control its sway. The first traveler establishes far-side control so the stabilizers can subsequently cross.
This browser could not play the video. Try the Download MP4 link below.
Turn an upside-down table onto its feet by coordinating lifts, edge pivots, and regrips as its center of mass passes over the support edge.
This browser could not play the video. Try the Download MP4 link below.
Remove a misaligned drawer from a freestanding cabinet while a partner prevents the cabinet from moving or tipping. Pull direction matters as much as pull magnitude.
This browser could not play the video. Try the Download MP4 link below.
Fold a large articulated object, pass it through a narrow opening, then restore and lock its original shape. Both robots must support sections that become unstable when unlocked.
This browser could not play the video. Try the Download MP4 link below.
Position a shared net beneath a falling payload and absorb its impact without letting it touch the floor or tearing the net.
This browser could not play the video. Try the Download MP4 link below.
Intercept a beam that is translating and rotating, then bring it to rest using both end grips. An early one-ended catch can amplify its rotation.
This browser could not play the video. Try the Download MP4 link below.
Move a rolling ball through three separately held gutter segments into a cup. Adjacent robots must align height, slope, and overlap before the ball arrives.
This browser could not play the video. Try the Download MP4 link below.
Two robots launch a ball by stretching and lifting a shared sheet while a third positions a receiving container. Launch timing and catcher movement must agree.
This browser could not play the video. Try the Download MP4 link below.
Use separate paddles to send a puck through ordered checkpoints on a table, then stop it in a goal. Neither robot can reach the whole playing surface.
This browser could not play the video. Try the Download MP4 link below.
Intercept and brake a rolling barrel before it crosses a hazard boundary. The robots must avoid deflecting it sideways while removing its kinetic energy.
This browser could not play the video. Try the Download MP4 link below.
Tilt a jointly held board to roll a ball through a maze without entering traps. Each robot's handle motion affects both pitch and roll.
This browser could not play the video. Try the Download MP4 link below.
Two robots turn a rope while a third jumps over it repeatedly. Rope speed, end phase, and takeoff timing must stay synchronized.
This browser could not play the video. Try the Download MP4 link below.
Perform repeated baton handoffs while both robots continue along adjacent lanes. Each transfer must occur inside a marked exchange zone without stopping or dropping the baton.
This browser could not play the video. Try the Download MP4 link below.
Seat a hanging payload in a narrow cradle. One robot controls the suspension cable while the other guides the object and dissipates residual swing.
This browser could not play the video. Try the Download MP4 link below.
Two helpers assist a fallen third robot back to standing. The fallen robot actively contributes with its remaining ground contacts, and all three must finish independently balanced.
This browser could not play the video. Try the Download MP4 link below.
A helper lifts a heavy obstacle enough for a trapped robot to withdraw its leg. The helper must hold clearance until the limb is fully clear, then lower the obstacle safely.
This browser could not play the video. Try the Download MP4 link below.
A robot on firm ground helps a teammate escape a high-drag patch. The trapped robot must step and push in coordination with the helper's pulls.
This browser could not play the video. Try the Download MP4 link below.
One robot slips off a low ledge while tethered to a partner. The partner must arrest the fall and help the slipping robot regain a stable support.
This browser could not play the video. Try the Download MP4 link below.
A standing robot actively balances while one teammate stabilizes it and another replaces a removable module. Removing the module changes the patient's mass distribution.
This browser could not play the video. Try the Download MP4 link below.
One robot leans beyond its unsupported balance limit to retrieve an object while the other counterbalances it, then both return to independent standing.
This browser could not play the video. Try the Download MP4 link below.
Carry a ladder into position, stabilize it while a teammate climbs to retrieve an object, then bring both robots, the object, and the ladder back to ground level.
This browser could not play the video. Try the Download MP4 link below.
Cut a marked section of a workpiece using a shared two-ended saw. The robots alternate pulling and yielding so the blade stays aligned instead of buckling or binding.
This browser could not play the video. Try the Download MP4 link below.
Hold a freely supported workpiece steady while a teammate performs a torque-producing tool operation. The holder must counteract reaction torque without blocking access.
This browser could not play the video. Try the Download MP4 link below.
Tighten a coupling while preventing the connected pipe from rotating. One robot holds the protected side with a wrench while the other turns the mating component.
This browser could not play the video. Try the Download MP4 link below.
Shape a rod around a fixed form using coordinated forces at its ends. The robots must distribute bending rather than creating a sharp unintended kink.
This browser could not play the video. Try the Download MP4 link below.
Spread a spring clip, align it around a mounting feature, and release both ends into their grooves. Premature release can eject or mis-seat the clip.
This browser could not play the video. Try the Download MP4 link below.
Lift a load using a hand winch while a teammate manages its retaining pawl during regrips. Neither robot may let the drum roll backward uncontrollably.
This browser could not play the video. Try the Download MP4 link below.
Pump a lifting actuator while a teammate meters a valve to reach and hold a target height. Excess pressure, flow, or mistimed venting causes overshoot or descent.
This browser could not play the video. Try the Download MP4 link below.
Sweep scattered objects into a collector held by a teammate while leaving protected objects untouched. The collector must move to intercept actual object trajectories.
This browser could not play the video. Try the Download MP4 link below.
Route a flexible cable through a bent conduit by coordinating feeding and pulling. Too much feed causes buckling; too much pull increases friction and can jam the cable at bends.
This browser could not play the video. Try the Download MP4 link below.
Fit an open chain around separated sprockets, join its ends, and demonstrate a complete driven cycle without derailment.
This browser could not play the video. Try the Download MP4 link below.
Wind a loose rope onto a spool while a teammate moves the guide to form orderly layers. Spool rotation, guide travel, and tension must remain synchronized.
This browser could not play the video. Try the Download MP4 link below.
Route a long hose through a marked corridor and around obstacles without kinks or excess tension. Three robots manage separated sections so moving one bend does not disturb the rest.
This browser could not play the video. Try the Download MP4 link below.
Pull a flexible cover over an object with protrusions, align its markers, and fasten its lower edge. The team must move slack around snag points rather than simply pulling harder.
This browser could not play the video. Try the Download MP4 link below.
Stretch and route a closed elastic loop around a selected set of posts while avoiding neighboring posts. The robots must coordinate which side supplies slack during each placement.
This browser could not play the video. Try the Download MP4 link below.
Two robots hold separated controls so a third can cross a gate and establish a new hold-open mechanism. They then rotate roles to bring the entire team through.
This browser could not play the video. Try the Download MP4 link below.
Assemble a small crane in an order that keeps it stable, then use it to position a load. One robot supports the boom while others install ballast and the payload connection.
This browser could not play the video. Try the Download MP4 link below.
Traverse parallel routes where standing on a pressure tile enables a floor section for the partner. The robots must alternate holding position and advancing without stranding either teammate.
This browser could not play the video. Try the Download MP4 link below.
One robot performs work at several stations while another manages its power cable. The handler must prevent snagging, excessive tension, and insufficient slack as the worker changes route.
This browser could not play the video. Try the Download MP4 link below.
Remove a target crate from a mechanical interlock by holding other crates in specific positions. Releasing a support too early lets the mechanism relock.
This browser could not play the video. Try the Download MP4 link below.
Move through alternating air jets while sharing a shield. The robots must exchange shielding positions and use sheltered areas to pass both teammates through.
This browser could not play the video. Try the Download MP4 link below.
Intercept a moving cart, control its speed, and align it with a docking latch. One robot brakes while the other steers and manages the latch.
This browser could not play the video. Try the Download MP4 link below.
Hand an object through a wall opening when neither robot can see the other's workspace. Safe transfer depends on contact sensing and communication about support.
This browser could not play the video. Try the Download MP4 link below.
Identify and assemble correct part pairs when each robot sees only one component of the matching code. Communication determines which parts should be connected.
This browser could not play the video. Try the Download MP4 link below.
Guide a teammate carrying a view-blocking load through obstacles. The guide can see the route but cannot substitute for the carrier's manipulation role.
This browser could not play the video. Try the Download MP4 link below.
Insert a connector when the manipulating robot cannot see the critical alignment. A spotter has the useful view but cannot reach the interface, so it must communicate corrections.
This browser could not play the video. Try the Download MP4 link below.
Move a loaded cart over bumps and slopes by coordinating propulsion, steering, and braking. The robots exchange effort as the terrain changes.
This browser could not play the video. Try the Download MP4 link below.
Place objects on a light, narrow wheeled platform while a teammate keeps it from rolling or tipping. The final load arrangement must be stable without either robot holding it.
This browser could not play the video. Try the Download MP4 link below.
Transfer a fragile load from one pair of carriers to another inside a restricted handoff area. The team must maintain support while exchanging one carrier at a time.
This browser could not play the video. Try the Download MP4 link below.
Intercept a fast stream of objects and sort them into bins through a two-robot pipeline. One robot captures and stages objects while the other performs the longer bin placement.
This browser could not play the video. Try the Download MP4 link below.
Fit a telescoping frame between two mounting points when each robot can measure only its own endpoint. They must agree on extension and orientation before locking it.
This browser could not play the video. Try the Download MP4 link below.
Move and settle a suspended payload using three independently managed cables. No robot may touch the payload directly; useful motion comes from coordinated cable lengths and tensions.
This browser could not play the video. Try the Download MP4 link below.
Move a shared base along a route while keeping an upright pole balanced. The robots control separated handles, so their combined forces determine base translation and yaw.
This browser could not play the video. Try the Download MP4 link below.
Compress springy contents while a teammate closes and latches a container. The compressing robot must withdraw its tool without allowing the contents to escape or the lid to reopen.
This browser could not play the video. Try the Download MP4 link below.